Incorrect or missing information? Servers
If you want to download anything, you need to have access to one or more Usenet servers. For each server you need to specify its parameters.
Priorities
You assign each server a priority, a number between 0 (highest) and 99 (lowest). Servers that share the same priority form a group.
SABnzbd first tries the highest priority group, using the first server in it that has a free connection. If that server does not have the article, another server in the same group is tried.
Only when no server in the group has the article does SABnzbd move to the next lower priority group, using the same method.
Article availability
This statistic will show you how many of the requested articles were available on this server. The number of requested articles is included, to offer a comparison between the servers. A backup (lower priority) server is only asked for articles the higher priority servers did not have, so it is tried less often. If such a server is tried rarely and still shows low article availability, the subscription may not be worth keeping.
Basic settings
NOTE Check your Usenet provider's documentation for the proper values!
| Enable |
If you have multiple servers, you can use this field to quickly enable or disable servers. This field can be set/reset by the Scheduler. |
| Server description Advanced |
The name of the server in the Config and download reports. |
| Host | The DNS name of the server. Example: news.my-isp.com |
| Port | The standard port is 119. Some servers use a different port number. SSL is usually port 563 or 443. |
| SSL |
Use a secure connection to the server. NOTE Most providers use port |
| Username | Often you need to supply the user account of your Usenet subscription. |
| Password | Often you need to supply the password of your Usenet subscription. |
| Connections |
Usenet providers offer different amounts of simultaneous connections.
You may need to specify the maximum amount allowed in order to get full speed. A large number rarely helps;
most servers work best with something between 8 and 30.See High speed downloading for more information. |
| Priority | See Priorities section above. |
| Retention Advanced |
Set here the maximum retention time of your server. Retention means the number of days that articles are kept by the server. 0 means infinite retention. Only use this when you have multiple servers and you want to stop SABnzbd wasting time asking servers for articles they cannot have. Be aware that retention times advertised by Usenet providers are not absolute. If you set it too low, your other servers will be used more intensely. There is no reason to set a retention time when you have only one server. |
| Timeout Advanced |
Time out in seconds for error recovery. Be careful, do not set this to a very low value, your provider will not like that. A common value is 60. |
| Certificate verification Advanced |
SABnzbd will verify the certificates your server uses in order to verify its identity. Read more on Certificate verification. WARNING Disabling or setting this check to
|
| SSL Ciphers Advanced |
See SSL Ciphers. |
| Required Advanced |
In case of connection failures, the download queue will be paused for a few minutes instead of skipping this server. This way you can prevent secondary (block) servers from being used when there is a temporary problem with your main server. NOTE If you enable this on multiple servers, they all need to be available before the download queue will be unpaused. |
| Optional Advanced |
If you use multiple servers and some of these servers are not very reliable, you can declare them "optional". This means that if such a server causes too many problems (like time-outs) it will be ignored for some time. NOTE When you declare a server with a long retention time as optional and the server is temporary out-of-service, SABnzbd will fall back to another server. If the alternative server has a shorter retention time, you will miss articles if the articles are beyond the retention time of the alternative server. It is best to set your most reliable and longest retention time server as a lower priority server but not as optional. Secondary servers (cheaper, less reliable, shorter retention time) can be set as high priority and optional. |
| Articles per request Advanced |
Number of articles to request per connection (pipelining). The default is See NNTP Pipelining documentation for more information. |
| Account expiration date Advanced |
If you supply the expiration date of your server subscription, SABnzbd will warn you 5 days in advance. NOTE The server will not be automatically disabled. |
| Quota Advanced |
If you have a block account, SABnzbd can warn you when your quota has expired. Most useful if you set it at around 75% of the block size that you bought, so you are warned early. NOTE The server will not be automatically disabled. |
| Personal notes Advanced |
In case extra information is necessary to identify this server to you on this Configuration page. |
