Incorrect or missing information? Special settings


Field name Default Meaning
start_paused If checked SABnzbd will always start up in "Paused" mode
no_penalties Some Usenet servers have intermittent login (or other) problems. For these the server blocking method is not very favourable. Setting this option will limit blocks to 1 minute.
ignore_wrong_unrar On Linux, SABnzbd checks whether the installed unrar or rar program is supported and issues a warning if not. Set this option if you think you know better.
overwrite_files When unpacking, this will overwrite existing files instead of creating an alternative name.
create_group_folders Older versions of SABnzbd had the possibility to move downloads to folders named after the actual Usenet group. This option is made more or less obsolete by the category system. If you still want the old behaviour, remove all categories and set this option to 1
queue_complete_pers Set this to 1 if you want end-of-queue actions Shutdown/Standby/Hibernate to be persistent (remembered) after restarts
quick_check Normally par2-based downloads are verified and (if required) repaired by the external par2 program. This takes a lot time. SABnzbd can check the correctness of downloaded files on the fly. A completely correct download does not have to be processed by par2 anymore. If there are any error in the files, the par2 program is launched anyway. Normally you would always want this option on.
api_warnings When the API is accessed by external tools without proper authentication, SABnzbd will show a warning. This is a security warning that you should take seriously. However, it seems that there are some security tools that try to access anything that looks like a webserver. If you cannot disable the cause of the warnings, you can choose to disable the warning.
allow_64bit_tools If your 64bit Windows system has problems running the 64bit releases of par2 and unrar, you can force the use of the 32bit releases.
ampm Display ETA in AM/PM notation, only applicable to some locations in older skins.
enable_unrar, enable_unzip, enable_7zip, enable_filejoin, enable_tsjoin Enable or disable the UnRar, UnZip, 7zip, filejoin and TSJoin tools. If disabled, the archive/split files will not be unpacked.
prospective_par_download When corrupt or missing articles are detected par2 repair blocks (if available) will be queued already during initial download, where 1 corrupt article = 1 par2 block. This might result in a slight over-estimation of required par2 blocks. [2.0.0+ only]
never_repair Only perform QuickCheck and par2-verify, but never par2-repair. Use this when your low-performance system has trouble running repairs. All available par2 files will be downloaded, so you can let another system do the repair. If the download verifies OK, post-processing will be done as usual.
allow_streaming Experimental option allowing streaming. You'll need a mediaplayer that can play from an incomplete set of unprocessed files. Jobs will not be post-processed, but remain in the temporary download folder and finally end up in History as "failed". From there you can either post-process the job after all or just delete everything.
ignore_unrar_dates Normally unpacked files will get the date/time stamp they have in the archive. If you set this option, the files will get the date/time of unpacking.
osx_menu Uncheck this to remove the SABnzbd icon in the macOS menu bar
osx_speed Uncheck this to prevent the display of download speed adjecent to SABnzbd's icon in the macOS menu bar
win_menu Uncheck this to remove the SABnzbd icon from the Windows systray
use_pickle Only check this when there is a problem with one of the standard Python libs: [0.6.15+ only]
allow_incomplete_nzb Sometimes you get an incomplete NZB file (partial content, incorrect syntax etc.) You can enable this option to allow SABnzbd to salvage as much as possible from the NZB. The job will enter the queue in paused mode.
rss_filenames Normally the RSS titles are used to name jobs. If you prefer the (usually) more compact NZB file names that are generated by index sites, check this. The RSS matching still occurs on titles only!
ipv6_hosting Some systems have problems dealing with the IPv6 equivalent of "localhost" for SABnzbd host. Therefore SABnzbd will not try to bind to the IPv6 localhost by default when the SABnzbd host is set to "localhost". Enabling this will binding to all addresses of localhost. Alternatively you can also set the SABnzbd host to ::1 to only bind to the IPv6 localhost.
keep_awake 0 will disable SABnzbd's attempts to keep the system awake while the queue isn't empty.
empty_postproc Do post-processing and run the user script even if nothing has been downloaded. This is useful in combination with tools like SickBeard, for which running the script on an empty or failed download is a trigger to try an alternative NZB. Note that the "Status" parameter for the script will be -1. [0.7.5+ only]
html_login HTML based login form, uncheck for basic authentication. Both offer similar security but password managers might not be able to fill basic authentication automatically. [1.2.0+ only]
wait_for_dfolder Some people use external or network drives for the "temporary download folder". It can happen that such a drive isn't mounted yet when SABnzbd starts up, causing it to create a new folder at the default location. To prevent this, set the option to 1. This will make SABnzbd wait until the drive is available. Note that SABnzbd will hang until the drive is available! Also, the folder must already exist otherwise SABnzbd will hang until terminated. [0.7.8+ only]
warn_empty_nzb Will enable warnings about empty NZB files, uncheck to surpress warnings.
enable_bonjour Will announce itself on Apple's Bonjour protocol.
allow_duplicate_files Some NZB's have the same file listed twice, SABnzbd will only add the largerst of the files with the same name by default. If you want both files, enable this.
warn_dupl_jobs If checked, will issue a warning when a duplicate job is detected and subsequently paused or deleted. Uncheck if you find the warnings a nuisance [0.7.17+ only]
backup_for_duplicates Check to backup dectected duplicate NZB's.
enable_par_cleanup Normally SABnzbd will clean up par2 files after verify/repair. For testing purposes you can disable this by using 0.
disable_api_key If checked API calls don't require the API key.
api_logging Check to log all API calls.
fixed_ports Checking this option will prevent SABnzbd from searching for a free web port, potentially causing a termination. Useful in debugging situations. [Removed in 2.0.1]
enable_meta Enable meta-tags coming from indexers or from the content of the NZB. These tags contain cleaned up versions of titles, episode names, etc. If you prefer that everything is derived from the NZB name, disable.


Field name Default Meaning
size_limit 0 Any download that exceeds this value will be paused and get priority "low". You can use the K/M/G notation, so e.g. 4.7G
folder_max_length 128 On Windows, the total path is limited to 255 characters. A combination of long folder names and long file names may lead to problems. Set this option to limit each element of the total path. Each element will be truncated to the specified number. 64 is a safe value. The option will also work for other operating systems.
fsys_type 0 Only for Unix/Linux systems. 0 = Determine automatically, 1 = Names are stored as 8-bit ASCII characters, 2 = Names are stored as UTF-8. Use this only when the names created by SABnzbd look distorted! It will only work for folders created by SABnzbd itself, not files and folders created by unzip and unrar.
movie_rename_limit 100M The minimum size of a file to trigger file renaming in the Sort functions
nomedia_marker Just before unpacking of files into the final folder, SABnzbd will put a special marker file (e.g. ".nomedia") in the folder. Afterwards it will be deleted. This prevents some mediaplayer software from trying to index the folder while still incomplete. You can disable the feature by clearing the field, or you can set an alternative name. Check your media software's manual.1
req_completion_rate 100.2 Minimum percentage to allow pre-check to continue downloading.
wait_ext_drive 5 When SABnzbd wants to store files on the final destination, this destination might be an external drive. Especially USB drives can take considerable time to wake up after going into standby. SABnzbd will try 5 times with intervals of one second. You can increase this value if needed. [0.7.1+ only]
history_limit 10 Some external tools query the full history repeatedly, without setting a limit to the amount of items. With a large history, this can lead to problems. Set this option to limit the history.
show_sysload 2 When working on a Linux/Unix system you can have SABnzbd display no system information (0), Only the CPU load indicators (1) and also the memory usage (2)2 [0.7.4+ only]
ipv6_servers 1 Control the use of IPv6 Usenet server addresses. Only useful when you have an IPv6 capable ISP and connect to servers that (also) have IPv6 addresses. Meaning: 0 = don't use, 1 = use when available and reachable, 2 = force usage (when SABnzbd's detection fails) [0.7.6+ only]
rating_host Instead of OZnzbd, you can switch the host to connect to for rating. The indexer needs to support this!
selftest_host In order to check proper IPv6 connectivity and your external IPv4 address, SABnzbd needs to connect to a known external IPv6 address and a server that returns the external IP address. By default we use our own server for this (we don't send any data). You can choose to use another known IPv6 host, e.g. However, this will cause the external IPv4 address detection to fail in the status window, this does not affect the functioning of SABnzbd.
rss_odd_titles see text Some RSS feeds produce very awkward titles which are fine for filtering, but not as job titles. For all indexers that are listed here, the actual NZB file name will be used instead of the title. The default is a comma-separated list of URLs and the default is:,, [0.7.4+ only])
prio_sort_list A list of file name extensions. Matching files will be the first to be downloaded within an NZB.
Example: sfv, nfo [0.7.5+ only]
quick_check_ext_ignore nfo, sfv, srr A list of file name extensions that will be ignored during QuickCheck. If they are missing but all other files are correct, QuickCheck will still pass [2.0.0+ only]

Very special option

Below is one option that cannot be set from the Web UI, because it would defeat its security purpose.
You can only access it by directly editing the sabnzbd.ini file, while SABnzbd is not running.

Field name Default Meaning
config_lock If 1, forbids all access to the Config pages.